Leigh Super FMT Frame Mortise & Tenon Jig
The Super FMT can accommodate all popular brand routers. It is made for use with plunge routers only and will not work with fixed-base routers.
A router with a 1/2" collet is required to get the most from your jig. As shown below, all routers mount on the Super FMT sub-base using one of two methods: hold-down rods through the fence rod holes in the router base, or screws through the sub-base, directly into the router base.
Router That Fit Super FMT
|BOSCH||1611, 1611EVS, 1613, 1613EVS, 1613AEVS, 1614, 1614EVS, 1615, 1615EVS, 1617 Plunge Base, 1619EVS, B1450, B1550, GOF1600, GPF1700ACE, POF1200AE, POF1400ACE|
|DEWALT||DW614, DW615, 616 Plunge Base, 618 Plunge Base, DW621, DW621K, DW624, DW625, DW625EK|
|ELU||OF97, OF97E, MOF96, MOF96E, MOF131, MOF177, MOF177EK, 3303, 3304, 3337, 3338, 3339|
|FESTOOL||900, 1000, 1010, OF1400, OF2000, OF2000E, OF2200|
|FREUD||FT2000, FT2200, FT3000|
|HITACHI||TR8, TR12, M8, M12 Series, M12VC|
|MAKITA||3600, 3612, 3612B, 3612BR, 3612C, RP1100*, RP1101*, RP0910*, RP1110C*, RP1801, RP2301|
|METABO||OFE728, OF1028, OFE1028, OFE1229|
|PORTER CABLE(ROCKWELL)||690 Series*, 890 Series including Type 2*, 7529*, 7538, 7539, 8529*|
|RYOBI||R150, R151, R500, R501, R502, R600, R601, RE180PL, RE600, RE601|
|TRITON||TRC001**, MOF 001**|
*attaches directly to Leigh sub-base with included screws.
**contact Leigh or Leigh distributor for mounting screws.
Guide and Bit Selection
Routing Mortise & Tenon Joints
Routing Angled Joints
Routing Multiple Joints