RTJ400 Router Table
Dovetail Jig – 16"
Item no. RTJ400

$469.00 CDN


View Shipping Rates

What’s Included

Parts included with the RTJ400 Jig:
  • Fully illustrated user guide
  • Instructional DVD video
  • Blockers to prevent routing in the wrong openings when routing full pitch through dovetails and 3/4″ box joints
  • Registration/contest card
  • Bit depth gauge for half-blind dovetails
  • 1/2″ 8° dovetail bit
  • 1/2″ 14° dovetail bit
  • 3/8″ straight bit
  • 1/2″ straight bit
  • 24″ stop rod for limiting router travel in half-blind dovetails and positioning side stop in box joints
  • 1/8″ ball end hex key for jig assembly and side stop and latch adjustment

  • e10 guide bushing for your router
  • Pin wrench to adjust and tighten bushing
  • Four cam-action speed clamps for mounting work pieces to the jig
  • Two side stops for mounting workpieces, and adjustable for all joint types
  • Five double-sided quick reference instruction strips,
    inserted in top of jig

Important Info

IMPORTANT Router Table Requirements
Router tables are typically used with a bearing or fence, however, the Leigh RTJ400 is guided around a guide bushing mounted in the router table. Leigh eBushes (guide bushings) are designed around the decades-old Porter Cable/Black & Decker industry standard. Therefore, you will need an insert ring to fit the eBush to your router table or router plate. See specifications below.
Leigh eBush and Nut
To fit the eBush to your router table insert plate, you need a 1-3/8" diameter counter bore insert ring. Check with your router table or router plate (router lift) manufacturer, as to what adaptation, if any, is required.
Play Video
Router Table Requirements video — Leigh RTJ400 Dovetail Jig