Compare Mortise & Tenon Jigs

 

FMT/FMT PRO SUPER FMT  
2002 to present 2009 to present  
CONSTRUCTION
Jig Material Aluminum Steel  
Jig Finish Anodized – clear Powder coated – silver
Jig Body Aluminum extrusions, die-cast aluminum end housings All CNC punched and formed –16 gauge  
Jig Table CNC machined Mic 6 aluminum plate – 0.500″ All CNC punched and formed –10 gauge  
Clamp Plate CNC machined aluminum extrusion – 0.780″ All CNC punched and formed –10 gauge  
Sub-base CNC machined aluminum plate – 0.185″ All CNC punched and formed –12 gauge  
Jig Table Movement Held and released by cam lever, held square by machined guide ways and pins Held and released by torque knobs, held square by magnets  
JOINT OPTIONS
Standard no. of joint sizes Inches: 68* / Metric: 79* Inches: 68* / Metric: 79*  
Specialty Square tenon joints Square tenon joints  
Specialty Louver joints Louver joints  
Specialty Y-Axis joints Y-Axis joints  
STANDARD EQUIPMENT
Clamps Cam-action speed clamps F-Clamps – twist action  
Clamping Capacity 3″ x 5-1/2″(76 x 140mm) 3″ x 5-1/2″(76 x 140mm)  
Sight Integrated retractable Snap in  
Side Stop CNC machined aluminum, reversible with mortise steady All CNC punched and formed –14 gauge  
Joint Guides Inch set: 5/16″(5 guides) / Metric set: 8mm(6 guides) Inch set: 5/16″(5 guides) / Metric set: 8mm(6 guides)  
DUST COLLECTION
Built-in with two adaptors Optional Vacuum Box with two adaptors  
OPTIONAL EQUIPMENT
Joint Guides (Inch) 16 optional guides (1/4″, 3/8″ & 1/2″ sets) 16 optional guides (1/4″, 3/8″& 1/2″ sets)  
Joint Guides (Metric) 18 optional guides (6, 10 & 12mm sets) 18 optional guides (6, 10 & 12mm sets)  
Joint Guides (Specialty) 7 optional guides (4 square tenon, 2 louver, 1 Y-Axis) 7 optional guides (4 square tenon, 2 louver, 1 Y-Axis)  
Dust Collection (Included with FMT Pro) Optional vacuum box with two adaptors  
* Hundreds of custom joint sizes are achievable with optional guides and bits