|◆ The e7 elliptical guide bushing, 7/16″[11,1mm] is supplied with the Leigh D4R Pro and SuperJigs for routing dovetails and box joints. Order only if you require a replacement. The 711C/711TP* guide bushing (7/16″[11,1mm]) can also be used, but only for routing dovetails.|
|● The 1/2″[12,7mm] e8 guide bushing is used only on Leigh F3, F24 and F18 Finger (Box) Joint Templates.|
|▲ The 5/8″[15,9mm] 716C or 716TP* guide bushing is used for 1/2″[12,7mm] shank through dovetail bits on the D4R Pro. The 5/8″[15,9mm] e10 guide bushing is used on Leigh F3, F24 and F18 Finger (Box) Joint Templates.|
|■ MAFELL – Rework adaptor slightly. Adaptor Mounting Screws: Included with router.|
|* Note: The 711TP and 716TP guide bushings have been replaced by 711C and 716C guide bushings.
Router not listed? If your router is not listed in the chart above, you may be able to fit a universal baseplate to your router. Please contact Leigh for assistance.
Posted in 1614.