|
|
The Tenons |
|
|
|
| 1. |
|
Select the joint guide and matching bit for the desired mortise & tenon size. |
 |
|
|
|
| 2. |
|
Mark layout lines on one workpiece.
|
 |
|
|
|
| 3. |
|
Clamp your workpiece against the clamp plate and sidestop fence. Align the sight over the layout lines and lock the front-to-back limit stops against the stop post to prevent front-to-back movement. |
|
 |
|
|
|
| 4. |
|
Rout the tenon. All similar tenons may be routed without having to mark or sight the tenons. |
|
 |
|
|
|
The Mortises |
|
|
|
| 1. |
|
Mark the left-to-right mortise center position on the mortise workpiece and clamp it roughly in the center of the table opening. |
|
 |
|
|
|
| 2. |
|
Snap the sight in place. Move the table left and right to sight for center and tighten the table position lock knobs. |
|
 |
|
|
|
| 3. |
|
Place the router/sub-base (not shown) on the jig and plunge rout the mortise. |
|
 |
|
|
|
|
|
